水泥仿木樹樁石作為一種戶外園林景觀小品之一，多用在公園、景區草坪綠化周邊等市政景觀工程中，和花草樹木協調搭配，裝飾美觀。因外觀很像木頭，但卻又不是木材制作的，次看到它的朋友可能會好奇，他是怎么制作的呢？下面小編給大家講解一下水泥仿木樹樁石的毛胚制作方法和正確安裝過程。

Cement imitation wood tree stump stone, as one of the outdoor landscape ornaments, is often used in municipal landscape projects such as parks, scenic areas, lawns, and greenery. It is coordinated and matched with flowers, plants, and trees to achieve beautiful decoration. Because it looks very similar to wood, but is not made of wood, friends who see it for the first time may be curious about how it is made? Below, the editor will explain to you the rough embryo production method and correct installation process of cement imitation wood tree pile stones.

1、要配好鋼筋

1. Firstly, it is necessary to prepare the steel reinforcement

仿木樹樁石的尺寸為長50公分，高為40公分，5根為一連排。豎的鋼筋為4MM的5根，橫的鋼筋為5MM的2根，

The size of the imitation wood tree stump stone is 50 centimeters long and 40 centimeters high, with 5 pieces arranged in a row. The vertical steel bars are 5 pieces of 4mm, and the horizontal steel bars are 2 pieces of 5mm,

2、把混凝土灌入模具中、靜置脫模

2. Pour concrete into the mold and let it stand still for demolding

在灌混凝土之前，需要把鋼筋插入到模具孔中，然后再把混凝土倒入仿木樹樁石模具中、靜置等干脫模圖片如下：

Before pouring concrete, it is necessary to insert the steel bars into the mold holes, and then pour the concrete into the imitation wood tree pile stone mold, let it stand, etc. The dry demolding image is as follows:

3、水泥仿木樹樁石的正確安裝方法

3. The correct installation method for cement imitation wood tree pile stones

A：水泥仿木樹樁石的安裝方法比較簡單，它不像水泥仿木欄桿那樣要打一個一個的預埋孔，而是打一排預埋溝，深度約15公分即可；

A: The installation method of cement imitation wood tree pile stones is relatively simple. Unlike cement imitation wood railings, which require pre embedded holes one by one, a row of pre embedded trenches with a depth of about 15 centimeters can be drilled;

B：預埋溝打好以后，從頭到尾部放一條直線，即保持水泥仿木樹樁石在一條水平線上，安裝好就回填混凝土，安裝圖片如下：

B: After the pre embedded trench is dug, a straight line should be placed from beginning to end, that is, to keep the cement imitation wood tree pile stones on a horizontal line. After installation, backfill concrete. The installation picture is as follows:

水泥仿木樹樁石安裝方法

Installation Method of Cement Imitation Wood Tree Piles and Stones

C：安裝好以后，進行下一步的油漆工藝噴漆處理，油漆采用水泥專用油漆，噴漆前直接將油漆兌水，用木棒調勻，然后用2.5-3.0口徑的噴槍噴涂即可，這里需要注意的是水泥樹樁石表面需要保持干燥才能噴漆

C: After installation, proceed to the next step of painting process and spray painting treatment. Cement specific paint is used for painting. Before painting, mix the paint with water directly, mix it evenly with a wooden stick, and then spray it with a 2.5-3.0 caliber spray gun. It should be noted that the surface of cement tree stumps needs to be kept dry before painting